BB500用于快速,高效的中硬性,硬脆性和韌性樣品預粉碎。針對實驗室和工業不同類型樣品,有多種材質配件可選,包括無重金屬污染型。
少量樣品可以選擇批量進樣方式處理,大量樣品可以選擇連續進樣處理方式。間隙可調和零點校正保證了實驗結果的可重復性。
BB 500 傾斜的研磨腔和強勁的驅動保證有效的破碎運動。
應用實例
合金, 巖石, 建筑原料, 氧化物陶瓷, 水泥熔渣, 爐渣, 焦炭, 煤, 玄武巖, 玻璃, 石英, 礦物, 礦石, 硅, 耐火粘土, 花崗巖, 長石, 陶瓷, ...
優點
- high crushing ratio 50:1
- continuous gap width setting
- 過載保護裝置
- 多種材料的無污染研磨
- removable no-rebound feed hopper
- 易清潔粉碎腔
- continuous and batch-wise crushing
- 除塵接口
- central lubrication (optional)
- 特別適用于生產設備的一體化集成
- 用于半導體材料研磨的特殊型號
性能指標
應用 | 粗粉碎 |
應用領域 | 化學 / 合成材料, 地質 / 冶金, 工程/電子, 建筑原料, 環境 / 資源回收利用, 玻璃/ 陶瓷 |
樣品特征 | 中硬性,硬性,脆性,硬韌性 |
粉碎原理: | 壓力 |
接收槽容積 | 15 l |
驅動 | 三相電機 |
驅動功率 | 7.5 kW |
電源數據: | 不同電壓 |
電源接頭: | 三相 |
防護類型 | IP 55 |
機體尺寸(寬x高x縱深) | 930 x 1400 x 1080 mm |
凈重 | ~ 1000 kg |
標準 | CE |
Please note:
受樣品材料性質和儀器配置/設定的影響
作用原理
The Jaw Crusher BB 500 is a robust and powerful forced-feed crusher. The feed material passes through the no-rebound hopper and enters the crushing chamber.
Size reduction takes place in the wedge-shaped area between the fixed crushing arm and one oscillating with high frequency. This motion ensures a consistent gap width in the stroke cycle so that the sample is crushed to the set fineness in one working step. Two massive flywheels transmit high impulse forces to the crushing jaws. The innovative design permits using both sides of the jaws thanks to a 180° rotation.
As soon as the sample is smaller than the discharge gap width, it falls into a removable collector. The continuous gap width setting with scale ensures optimum size reduction in accordance with the set gap width.
根據技術改造和誤差調整