九九热免费在线观看_毛片女人毛片一级毛片毛片_欧美在线视频一区二区_在线免费看av片_精品视频9999_99视频网站

閉口閃點測試儀(中英文說明)

產品說明

一、本儀器是根據國家標準GB/T261-2008《閃點的測定  賓斯基-馬丁閉口杯法》所規定的要求設計制造的。適用于按該標準規定的方法,測定石油產品用閉口杯、在規定條件下,加熱到它的蒸汽與空氣的混合氣接觸火焰發生閃火時的zui低溫度，即閉口杯法閃點。

二、本儀器采用彩色液晶屏幕顯示，全中文人機對話界面，無標識鍵盤，開放式、模糊控制集成軟件，模塊化結構等技術；對可預置溫度、試樣標號、大氣壓強、試驗日期等參數具有提示菜單，導向式輸入的工作方式。本儀器自動化程度高，使用方便、快捷，符合中華人民共和國標準GB/T261-2008《閃點的測定  賓斯基-馬丁閉口杯法》規定的試驗要求，是理想的同類進口儀器的替代產品，可廣泛用于鐵路、航空、電力、石油行業及科研部門。

三、主要技術指標和參數

1、工作電源    AC220V±10%， 50Hz；
2、溫度測量    量程 室溫～350℃；
                       重復性 ≤2℃；再現性 ≤4℃；
                       分辨性 0.1℃；精度 0.5%；
3、基數參數    升溫速度 符合GB/T261-2008標準；
                      點火方式 電子點火、氣體火焰；
4、環境溫度    （10～40）℃；相對濕度 ≤80%；
5、整機功耗    不大于500W。
四、閉口閃點測試儀(中英文說明)工作原理
本儀器在國家標準GB/T261-2008規定的條件下，把試樣裝入試驗杯，對裝有試驗油的試驗杯加熱，產生的石油蒸氣與周圍空氣形成的混凝合成氣體在火焰接觸發生閃火時的zui低溫度作為閃點。
計算機根據所采集的溫度變化情況由I/O口發出指令，控制加熱器，使試驗油溫度按一定速率上升，掃描周期、點火時間、微分檢測等均實施自動控制，當閃火被測出時，計算機系統停止數據采集，顯示閃火溫度并打印記錄結果，停止加熱，關閉火焰，大臂自動抬起，實驗結束。

五、閉口閃點測試儀(中英文說明)儀器成套性

1、儀器成套

I. Summary

The instrument is used to determine closed cup flash point of petroleum products. The instrument adopts colored LCD screen, man machine conversation interface, blank buttons, open and fuzzy controlled integration software, and modular structure. It can preset temperature, sample ID, barometric pressure, test date, and other parameters. It has prompt menu and input guide. The instrument is automatic, convenient, and rapid. It can meet the requirements of the National Standard of People’s Republic of China GB/T261-2008 “Test Methods for Flash Point of Petroleum Products （Pensky-Martens Closed Cup Method）”. It is the best choice of similar products. It can be widely used in the field of railway, aviation, power plant, petroleum industry, and scientific research institutes.

II. Purpose and scope

The instrument is designed and made as per the National Standard GB/T261-2008 “Test Methods for Flash Point of Petroleum Products （Pensky-Martens Closed Cup Method）”. It is suitable to determine closed cup flash point of petroleum products, which is expressed as the lowest temperature when the mixture of its vapor and air contacts flame and appears flash, using a closed oil cup under the stipulated condition.

III. Main technical specification and parameters

1. Power supply: AC 220V±10%, 50 Hz;

2. Temperature measurement:

（1） Full scale: room temperature～350℃;

（2） Repeatability: ≤2℃;

（3） Reproducibility: ≤4℃;

（4） Resolution: 0.1 ℃;

（5） Accuracy: 0.5%;

3. Basic parameters:

（1） Temperature rising speed: as per GB/T261-2008;

（2） Ignition mode: Electron device for ignition; gas flame for flame application;

4. Working environment:

（1） Ambient temperature: 10～40℃;

（2） Relative humidity: ≤80％;

5. Total power consumption: not more than 300 W;

IV. Working principle

Fill sample in the test cup, and heat the test cup containing sample on the instrument as per the requirements of the National Standard GB/T261-2008. The flash point is expressed as the lowest temperature when the mixture of sample vapor and air contacts flame and appears flash.

The controlling system can send orders through I/O port as per the collected temperature changes to control the heater, so that the sample temperature will increase at a certain rate. The

V. Full set and technical documents

1. Full set

2. Technical documents

（1） Operation Manual                                    1 piece

（2） Quality Certificate                                    1 piece

（3） Repair Guarantee                                     1 piece