產品標題:KC3011X1-BA1 12P6749X062模擬輸出模塊

型號：KC3011X1-BA1 12P6749X062

品牌：艾默生

                                                                 產品詳情資料：

在DPM1的數據傳輸階段，系統對故障的反應，例如從機故障，由通過CI854/CI854A設置選項卡中的BP標志配置定義的“自動清除模式"確定。如果啟用此參數，當從機***準備好進行用戶數據傳輸時，DPM1將所有分配的從機的輸出切換到故障狀態。DPM1隨后切換到清除狀態。如果禁用此參數，即使發生故障，DPM1也會保持在操作狀態，用戶可以控制系統的反應。同步和凍結模式除了DPM1（DP Master Class 1）和分配的從機之間的正常循環通信外，主機還可以通過多播向一組從機發送控制命令Sync和凍結。使用sync命令，被尋址的從設備將把輸出凍結在當前狀態。當輸出狀態保持不變時，主機接收的新輸出值將被存儲。在接收到下一個同步命令之前，存儲的輸出數據不會發送到輸出。使用“unsync"命令終止同步模式。

                          產品英文詳情資料：

The reaction of the system to a fault during the data transfer phase of the DPM1, for example a failure of a slave, is determined by the “Auto Clear Modus" defined via the BP flag configuration in the settings tab for CI854/CI854A. If this parameter is enabled, the DPM1 switches the outputs of all assigned slaves to a fail-safe state the moment a slave is no longer ready for user data transmission. The DPM1 subsequently switches to the clear state. If this parameter is disabled, the DPM1 retains in the operate state even in the event of a fault and the user can control the reaction of the system.

Sync and Freeze Mode In addition to the normal cyclic communication between the DPM1 (DP Master Class 1) and the assigned slaves, a master can send the control commands sync and freeze via multicast to a group of slaves. With the sync-command the addressed slaves will freeze the outputs in their current state. New output values received by the master will be stored while the output states remain unchanged. The stored output data are not sent to the outputs until the next sync command is received. The Sync mode is terminated with the “unsync" command.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用于識別目的，并不表示與任何權利持有人有任何關聯或授權。