| General specifications |
|---|
| Switching function | complementary |
| Output type | PNP |
| Rated operating distance | 25 mm |
| Installation | flush mountable |
| Output polarity | DC |
| Assured operating distance | 0 ... 20 mm |
| Reduction factor rAl | 0.5 |
| Reduction factor rCu | 0.5 |
| Reduction factor r304 | 0.6 ... 1 |
| Mounting angle | Al |
| Amplifier housing | Stainless steel |
| Nominal ratings |
|---|
| Operating voltage | 10 ... 30 V |
| Switching frequency | 0 ... 20 Hz |
| Hysteresis | 0.3 ... 5 typ. 2 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 3 V |
| Operating current | 0 ... 200 mA |
| No-load supply current | ≤ 25 mA |
| Switching state indicator | Multihole-LED, yellow |
| Functional safety related parameters |
|---|
| MTTFd | 7515 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|---|
| Ambient temperature | 0 ... 250 °C (32 ... 482 °F) |
| Mechanical specifications |
|---|
| Connection type | Connector M12 x 1 , 4-pin |
| Cable version | PFA cable, with armour of stainless steel |
| Core cross-section | 3 x 0.34 , screened |
| Housing material | PTFE / Al / 1.4305 / AISI 303 |
| Sensing face | PTFE |
| Degree of protection | amplifier IP67
sensor IP40 |
| Cable length | L = 15 m |
| Note | - amplifier 0 °C ... 70 °C
- r1.4305 dep. on thickness of measurement plate d:
r1.4305 = 1 for d < 1mm
Additional accessory: Protective cover SH-F35 is available for use in areas where there is moisture and as a means of mechanical protection. |
